Page 1 of 1
Adjusting the autozoom
Posted: Thu Mar 28, 2019 6:11 pm
by Sleuth
A (very) long time ago on a different forum, there was a method of manually tweaking the autozoom on the GPS.
However, the forum stopped (and this one was created) and so the knowledge has been lost.
I am attempting to adjust the autozoom levels for a motorway from 800m to 1.2km.
Can anyone remind me how to successfully make the new zoom level the default?
Thanks very much and best regards
Sleuth
Re: Adjusting the autozoom
Posted: Thu Mar 28, 2019 6:16 pm
by sussamb
I believe you simply let it autozoom to the current level then adjust it ... next time it should remember.
Re: Adjusting the autozoom
Posted: Thu Mar 28, 2019 8:41 pm
by Stu
turn the zumo on click on the speed on the bottom left press on hold on the speed in the top centre
The settings are in there I believe
Re: Adjusting the autozoom
Posted: Fri Mar 29, 2019 10:01 pm
by Sleuth
sussamb wrote: ↑Thu Mar 28, 2019 6:16 pm
I believe you simply let it autozoom to the current level then adjust it ... next time it should remember.
Hi Sussamb & Stu,
Thanks for the answers.
That is what I thought, but unfortunately, it appears you need to do it at the right time, or in combination with something else.
The 595 seems to be rather picky, it usually accepts the change when I am not intending it to change. I have no idea why or when.
Stu,
Thanks for that, it does indeed go to a developers page, and eventually, I found it. Developers Tests and Tools > Map Drawing > Auto Zoom
However, the options are less than clear:
Driving local: 500 minor unit zoom = 120m
Driving Highway: 0.5 unit zoom = 800m
Driving Ramp: 0.3 unit zoom = 500m
Does anyone have a reference table to link the units to feet/meters?
Thanks again.
Best regards
Sleuth
Re: Adjusting the autozoom
Posted: Sat Mar 30, 2019 9:18 pm
by Moose
Re: Adjusting the autozoom
Posted: Sun Mar 31, 2019 3:43 pm
by Sleuth
Thanks for the website, but I was more interested in the conversion of units or minor units to Metres (or feet).
Re: Adjusting the autozoom
Posted: Mon Apr 01, 2019 3:17 am
by Breezly
I think what you are seeing is both imperial and metric zoom levels.
On local roads 500ft or 120 meters
Highway .5 mile or 800 meters
Ramp .3 mile or 500 meters
Dependent on which unit of measurement is selected on the device.
Re: Adjusting the autozoom
Posted: Mon Apr 01, 2019 9:36 pm
by Sleuth
Breezly wrote: ↑Mon Apr 01, 2019 3:17 am
I think what you are seeing is both imperial and metric zoom levels.
On local roads 500ft or 120 meters
Highway .5 mile or 800 meters
Ramp .3 mile or 500 meters
Dependent on which unit of measurement is selected on the device.
Ok thanks for this, it certainly makes sense. Sorry for not thinking it through!
I currently have it listed in metric, but the developers page is therefore in Imperial.
Best regards
Sleuth