Simultaneous USB and Mount Power?

Having Garmin zumo XT problems? there is loads of help and advice in this forum
Post Reply
RadioFlyer
Posts: 10
Joined: Thu Apr 26, 2018 5:48 pm
Has liked: 1 time
Been liked: 1 time
Canada

Simultaneous USB and Mount Power?

Post by RadioFlyer »

I have read that a computer's USB port may not be able to supply sufficient current to keep a turned on XT from discharging the internal battery over a long period.

I am contemplating having a powered mount on my desktop next to the PC to supply the XT with power.

If the XT is connected as well to the PC via USB do any issues arise?

Thanks.
MotoToph
Posts: 59
Joined: Sun Nov 10, 2019 1:41 am
Location: Virginia Beach, Virginia
Has liked: 28 times
Been liked: 14 times
United States of America

Re: Simultaneous USB and Mount Power?

Post by MotoToph »

Why do you want to do this?

Why not plug it into the USB and see if it discharges?
ZUMO XT
K1600GT
Rofor
Posts: 180
Joined: Sun Jul 19, 2020 8:38 am
Has liked: 156 times
Been liked: 69 times
Austria

Re: Simultaneous USB and Mount Power?

Post by Rofor »

Just try it!

Modern pc's do have usb ports, which deliver more than the 'old' 0,5 amps so the chances, that it will work are good! Maybe you have to use an newer usb-c port and an adapter to the old mini-usb port on the Zumo XT....

Also it may help if you put the Zumo XT in 'GPS Simulation mode' in the settings so that it uses less power and than activate the standby-mode (short press on the on/off-button) - the screen should go black and a message on the screen will be displayed for a short time that your Zumo XT is charging.
Bye, Robert :)
(Actual: Tiger 800 XRx (2016), Garmin zumo XT, Cardo PackTalk, Nolan N70-2GT)
colirv
Subscriber
Posts: 188
Joined: Mon Dec 30, 2019 9:38 am
Location: Tyne & Wear
Has liked: 54 times
Been liked: 44 times
Contact:
Great Britain

Re: Simultaneous USB and Mount Power?

Post by colirv »

The USB port on my tablet/mobile phone charger offers 2.4A. That ought to be enough.
Colin
BMW R1250RS
https://www.namrider.com
jfheath
Posts: 2833
Joined: Sat Oct 19, 2019 4:17 pm
Location: West Yorkshire, Uk
Has liked: 372 times
Been liked: 795 times
Great Britain

Re: Simultaneous USB and Mount Power?

Post by jfheath »

I often have the USB lead plugged in when I am working at my desk. The XT1 or XT2 is mounted in an XT1 cradle - which provides the power from a Mains transformer. The USB cable is plugged in so that I am not constantly unplugging it from the XT1 or XT2 body - thus saving wear and tear on a particularly fragile component.

The XT1 and XT2 will not charge adequately when the Zumo screen is on. It will slowly lose power. The USB cable will charge it OK when the unit is turned off with a short press of the button (standby), but it cannot supply enough power to keep it running - unlike say the 590 or 595 Zumos.

The USB connection on the Zumos work in a similar way to those on phones - where the unti can be charging and taking power from the battery at the same time. My XT2 tends to get quite warm at the desk and the screen becomes sluggish in response to finger presses. But I do tend to have it on for a long time during the day - I forget to turn it off - which is a pain becasue when I make a phone call, I cannot hear anything 'cos the Zumo has taken control of the phone !!
Have owned Zumo 550, 660 == Now have Zumo XT2, XT, 595, 590, Headache
Use Basecamp (mainly), MyRouteApp (sometimes), Competent with Tread for XT2, Can use Explore for XT - but it offers nothing that I want !

Links: Zumo 590/5 & BC . . . Zumo XT & BC
Post Reply