I know you aren't.
I am just clutching at straws really. The chap in the link was having a similar problem.
The only other thing I can think of is that the 595 starts in MTP mode (it doesn't show drive letters). The Zumo 660 starts in Mass storage mode - has a drive letter for internal storage. I wonder if it is an issue related to your Operating System.
Try changing it on the 595:
Turn it on and get the map display showing.
Click on the speed in the bottom left corner.
Hold your finger on the speed indication, centre top on the new screen for about 6 seconds - until it loads 'Diagnostic Page'
Select Configuration and Settings
Select MTP Settings
Select Mass Storage
Save
Exit out of it and power if off. Try again
After that, I have run out of straws
The invisible unit
-
- Posts: 2814
- Joined: Sat Oct 19, 2019 4:17 pm
- Location: West Yorkshire, Uk
- Has liked: 369 times
- Been liked: 789 times
Re: The invisible unit
Last edited by jfheath on Sun Jan 12, 2020 6:19 pm, edited 2 times in total.
Have owned Zumo 550, 660 == Now have Zumo XT2, XT, 595, 590, Headache
Use Basecamp (mainly), MyRouteApp (sometimes), Competent with Tread for XT2, Can use Explore for XT - but it offers nothing that I want !
Links: Zumo 590/5 & BC . . . Zumo XT & BC
Use Basecamp (mainly), MyRouteApp (sometimes), Competent with Tread for XT2, Can use Explore for XT - but it offers nothing that I want !
Links: Zumo 590/5 & BC . . . Zumo XT & BC
-
- Site Admin
- Posts: 986
- Joined: Sun Apr 22, 2018 9:38 pm
- Location: Hull, UK
- Has liked: 414 times
- Been liked: 229 times
Re: The invisible unit
Same USB lead too?Blodstrupmose wrote: ↑Sun Jan 12, 2020 2:02 pm Played around with the old 660 and it works perfectly in the same USB port
- mzeist
- Posts: 116
- Joined: Fri Apr 27, 2018 8:52 am
- Location: Zeist, the Netherlands
- Has liked: 33 times
- Been liked: 31 times
Re: The invisible unit
I hope not, the 660 has a mini USB where the 595 has micro USB.Stu wrote: ↑Sun Jan 12, 2020 4:15 pmSame USB lead too?Blodstrupmose wrote: ↑Sun Jan 12, 2020 2:02 pm Played around with the old 660 and it works perfectly in the same USB port
Last edited by mzeist on Sun Jan 12, 2020 9:14 pm, edited 1 time in total.
Groet, Marcel.
ST1300 - Etrex Vista, 60CS, Co300, SPIII, SP2610, Nuvi760, Zumo660, Or650, Nuvi3590, Zumo590/5, Zumo XT
ST1300 - Etrex Vista, 60CS, Co300, SPIII, SP2610, Nuvi760, Zumo660, Or650, Nuvi3590, Zumo590/5, Zumo XT
Re: The invisible unit
Good shout, Win10 sometimes doesn't like mtp mode, should have thought of that earlier as it's advice I normally give to nuvi and Drive owners
-
- Site Admin
- Posts: 986
- Joined: Sun Apr 22, 2018 9:38 pm
- Location: Hull, UK
- Has liked: 414 times
- Been liked: 229 times
-
- Posts: 8
- Joined: Fri Jan 10, 2020 10:49 pm
- Location: Out There
- Been liked: 1 time
Re: The invisible unit
Thanks again guys.
I will give that MTP thing a try in the morning. Thanks jfheath, how the h... do you know those king of things. ?
It will be my last attempt before throwing it at the first person i meet with a GARMIN shirt on.
I will give that MTP thing a try in the morning. Thanks jfheath, how the h... do you know those king of things. ?
It will be my last attempt before throwing it at the first person i meet with a GARMIN shirt on.
- mzeist
- Posts: 116
- Joined: Fri Apr 27, 2018 8:52 am
- Location: Zeist, the Netherlands
- Has liked: 33 times
- Been liked: 31 times
Re: The invisible unit
I just wonder,
- did you try it on a different computer?
- are using a USB port that is an direct connection to you computer, not via an USB hub or Thunderbold port replicator?
- when plugged into your USB port, what is the Zumo display showing?
Groet, Marcel.
ST1300 - Etrex Vista, 60CS, Co300, SPIII, SP2610, Nuvi760, Zumo660, Or650, Nuvi3590, Zumo590/5, Zumo XT
ST1300 - Etrex Vista, 60CS, Co300, SPIII, SP2610, Nuvi760, Zumo660, Or650, Nuvi3590, Zumo590/5, Zumo XT
-
- Posts: 8
- Joined: Fri Jan 10, 2020 10:49 pm
- Location: Out There
- Been liked: 1 time
Re: The invisible unit
So where are we ?
The following has been tried and done, all with negative or no result result.
- Different cables
- Wait a long time for the laptop to recognise the unit.
- MTP setting set to"mass storage"
- Direct connection in the USB plug on the machine.
- Installed latest GARMIN USB drivers.
And just to recap.
- There is no "magic ping" when the unit is plugged into the usb.
- GARMIN EXPRESS is set to open when unit is connected.
- Unit is fully charged.
- Screen on 595 has no indication of being connected.
Tech support it is.
The following has been tried and done, all with negative or no result result.
- Different cables
- Wait a long time for the laptop to recognise the unit.
- MTP setting set to"mass storage"
- Direct connection in the USB plug on the machine.
- Installed latest GARMIN USB drivers.
And just to recap.
- There is no "magic ping" when the unit is plugged into the usb.
- GARMIN EXPRESS is set to open when unit is connected.
- Unit is fully charged.
- Screen on 595 has no indication of being connected.
Tech support it is.