New Firmware

Having Garmin zumo XT problems? there is loads of help and advice in this forum
MSTOCK27370
Posts: 204
Joined: Tue May 05, 2020 1:02 pm
Has liked: 13 times
Been liked: 33 times
United States of America

Re: New Firmware

Post by MSTOCK27370 »

colirv wrote: Sat Mar 13, 2021 10:02 am My understanding is that it is not the new firmware that's preventing maps being saved to the computer but the latest Garmin Express.
I just updated Express from 7.3.1.0 to 7.4.0.0. The installation options are still there, and the option to load to the computer is still there. However, I don't own a Zumo XT. So this installation issue appears to be some interaction between the Express software and the Zumo XT firmware. But, it does appear that the new Express version will allow loading to the PC - at least for the Nuvi 54LM, Zumo 450/550 and 590.
Last edited by MSTOCK27370 on Sun Mar 14, 2021 3:05 pm, edited 1 time in total.
Michael S.
Trinity, North Carolina
Zumo 590LM, 396LM, 550 BMW R1100RT, R100, R60/6
Stu
Site Admin
Posts: 985
Joined: Sun Apr 22, 2018 9:38 pm
Location: Hull, UK
Has liked: 413 times
Been liked: 229 times
Great Britain

Re: New Firmware

Post by Stu »

MSTOCK27370 wrote: Sun Mar 14, 2021 3:56 am
colirv wrote: Sat Mar 13, 2021 10:02 am My understanding is that it is not the new firmware that's preventing maps being saved to the computer but the latest Garmin Express.
I just updated Express from 7.3.1.0 to 7.4.0.0. The installation options are still there, and the option to load to the computer is still there. However, I don't own a Zumo XT. So this installation issue appears to be some interaction between the Express software and the Zumo XT firmware. But, it does appear that the new Express version will allow loading to the PC - at least for the Nuvi 54LM, Zumo 450/550 and 595.
I have a 590 and the XT so I will check with both when I get chance
jfheath
Posts: 2777
Joined: Sat Oct 19, 2019 4:17 pm
Location: West Yorkshire, Uk
Has liked: 361 times
Been liked: 769 times
Great Britain

Re: New Firmware

Post by jfheath »

Stu wrote: Sun Mar 14, 2021 6:16 am I have a 590 and the XT so I will check with both when I get chance
I posted this 12 March 8:45, but it would be good to have it confirmed.

Express displays both my XT and my 590/595 on the home screen. Even with the XT plugged in to the USB socket, if I select my 595 icon on the home screen, I get the original options to install the maps to the computer.

It suggests it has to be to do with the Express update rather than the v5.90 software on the XT.
Last edited by jfheath on Sat Mar 20, 2021 7:31 am, edited 1 time in total.
Have owned Zumo 550, 660 == Now have Zumo XT2, XT, 595, 590, Headache
Use Basecamp (mainly), MyRouteApp (sometimes), Competent with Tread for XT2, Can use Explore for XT - but it offers nothing that I want !

Links: Zumo 590/5 & BC . . . Zumo XT & BC
Stu
Site Admin
Posts: 985
Joined: Sun Apr 22, 2018 9:38 pm
Location: Hull, UK
Has liked: 413 times
Been liked: 229 times
Great Britain

Re: New Firmware

Post by Stu »

jfheath wrote: Sun Mar 14, 2021 6:29 am
Stu wrote: Sun Mar 14, 2021 6:16 am I have a 590 and the XT so I will check with both when I get chance
I posted this 12 March 8:45, but it would be good to have it confirmed.

Expess displays up both my XT and my 590/595 on the home screen. Even with the XT plugged in to the USB socket, if I select my 595 icon on the home screen, I get the original options to install the maps to the computer.

It suggests it has to be to do with the Express update rather than the v5.90 software on the XT.
I'm at work for the next 4 days and the house is upside down with decorating but I should be able to dig it out!

If I haven't posted in a couple of days then give me a nudge :D
User avatar
mzeist
Posts: 116
Joined: Fri Apr 27, 2018 8:52 am
Location: Zeist, the Netherlands
Has liked: 33 times
Been liked: 31 times
Netherlands

Re: New Firmware

Post by mzeist »

jfheath wrote: Sun Mar 14, 2021 6:29 am Expess displays up both my XT and my 590/595 on the home screen. Even with the XT plugged in to the USB socket, if I select my 595 icon on the home screen, I get the original options to install the maps to the computer.

It suggests it has to be to do with the Express update rather than the v5.90 software on the XT.
Even with no device attached, if I select my Nuvi 3590, Driveluxe 51 or Zumo 59x on the Express home screen, I get the option to install the maps to my PC. But not for my XT anymore after the XT firmware 5.90 upgrade was installed (*and* after I refreshed the maps on the device) there is now only the 'Manage Maps' option, which will only run if the concerned device is attached to usb.

In term of map management options, both 7.3.1.0 and 7.4.0.0 behave the same.

The 'Manage Maps' option is the same as for some other devices like them Montana 700 series, where the 'Install toe computer' option is also missing.

To me it suggests that this is the intended behaviour of Express and depending on the attached or installed GPS devices and their firmware version.. (and I'm not too happy about it..)
Groet, Marcel.
ST1300 - Etrex Vista, 60CS, Co300, SPIII, SP2610, Nuvi760, Zumo660, Or650, Nuvi3590, Zumo590/5, Zumo XT
User avatar
mzeist
Posts: 116
Joined: Fri Apr 27, 2018 8:52 am
Location: Zeist, the Netherlands
Has liked: 33 times
Been liked: 31 times
Netherlands

Re: New Firmware

Post by mzeist »

I wonder if abandoning map install to PC has something to do with Garmin Explore

https://support.garmin.com/en-CA/?faq=c ... Dl1JAWuEV8
Groet, Marcel.
ST1300 - Etrex Vista, 60CS, Co300, SPIII, SP2610, Nuvi760, Zumo660, Or650, Nuvi3590, Zumo590/5, Zumo XT
Exurban
Posts: 33
Joined: Mon Jul 23, 2018 3:36 pm
Has liked: 5 times
Been liked: 8 times
United States of America

Re: New Firmware

Post by Exurban »

I updated to 5.9 and now I don’t see the red and white compass needle and the map scale beneath it. If I pan the map it shows. But returning to the main map, nothing. It used to show up in the upper right but panning it would move to lower left and sometimes upper left. I like seeing the numerical scale with the line below it. Is it gone from the map?
sussamb
Posts: 1798
Joined: Mon Apr 23, 2018 1:06 pm
Has liked: 343 times
Been liked: 368 times
Great Britain

Re: New Firmware

Post by sussamb »

Any changes you're not expecting after a software update are normally solved by a master reset.
colirv
Subscriber
Posts: 185
Joined: Mon Dec 30, 2019 9:38 am
Location: Tyne & Wear
Has liked: 53 times
Been liked: 41 times
Contact:
Great Britain

Re: New Firmware

Post by colirv »

Conformation from MSTOCK27370 in the Garmin Express forums that the latest versions are fine with several other Garmins. It's just the XT that won't allow maps to be saved to the PC.
Colin
BMW R1250RS
https://www.namrider.com
User avatar
mzeist
Posts: 116
Joined: Fri Apr 27, 2018 8:52 am
Location: Zeist, the Netherlands
Has liked: 33 times
Been liked: 31 times
Netherlands

Re: New Firmware

Post by mzeist »

Exurban wrote: Sun Mar 14, 2021 3:20 pm I like seeing the numerical scale with the line below it. Is it gone from the map?
yes it's gone. it's sacrificed for the new map buttons I guess.
Groet, Marcel.
ST1300 - Etrex Vista, 60CS, Co300, SPIII, SP2610, Nuvi760, Zumo660, Or650, Nuvi3590, Zumo590/5, Zumo XT
Post Reply