When I power up my Garmin Zumo XT, I get the message, "Maps are corrupt and cannot be used. Go to www.garmin.vom/express to download the latest maps. OK"
How do I get rid of that message. The Garmin Zumo XT does seems to work just fine, despite that message.
Maps Are Corrupt And Cannot Be Used
Re: Maps Are Corrupt And Cannot Be Used
Yes, I have installed a number of non-Garmin 3rd party maps on it.
-
lkraus
- Subscriber
- Posts: 442
- Joined: Mon Aug 24, 2020 2:36 pm
- Location: Central Ohio
- Has liked: 58 times
- Been liked: 139 times
Re: Maps Are Corrupt And Cannot Be Used
Remember that there should be only one active routable map for an area.
Un-check the non-Garmin maps in myMaps.
If the message persists, remove all the 3rd party maps and replace one at a time.
Un-check the non-Garmin maps in myMaps.
If the message persists, remove all the 3rd party maps and replace one at a time.
____________________________________
2006 R1200RT
Galaxy S10<>Zumo XT<>Sena 20S
2006 R1200RT
Galaxy S10<>Zumo XT<>Sena 20S
Re: Maps Are Corrupt And Cannot Be Used
You could also try running JaVaWa's Device Manager and see if that throws up any errors
https://www.javawa.nl/jdm_en.html
https://www.javawa.nl/jdm_en.html
Re: Maps Are Corrupt And Cannot Be Used
Javawa's Device manager does not work for the XT. The XT uses MTP and that is not supported by Javawa Device Manager!sussamb wrote: ↑Sun Dec 17, 2023 7:59 am You could also try running JaVaWa's Device Manager and see if that throws up any errors
https://www.javawa.nl/jdm_en.html